Wheel Impressions from Cobra RM43SP80V
| ♥ 0 |  Excellent video review of the Cobra RM43SP80V. One of the problems with my current four wheel rotary is the deep tracks left by the four wheels. (My grass is currently mowed at the second highest height setting, so this might be a factor as well). I noticed on the RM43SP80V that the two front wheels lie outside the width of the rear roller. Am I right in assuming the roller doesn’t quite roll over the tracks from the front wheels? If so, how noticeable are the tracks left by the front two wheels in this model when cutting at a higher height? ANSWERED Marked as spam  Posted by MJ Asked on October 21, 2024 11:00 am 22 views Add comment |
| Private answer Hi I recently laid turf and used the heavy Cobra RM43SP80V to do the first cut. I was also concerned about the wheels digging into the newly laid, rather wet turf, but it was absolutely fine as the roller took most of the weight. I did need to take care turning on the spot though. There seems to be little weight on the front wheels so you don't see the wheel tracks on the lawn, just the stripes. I was cutting at 40mm so would need to test at a higher setting to see if this makes a difference. I think the last cut was already done this weekend (unless this mild weather continues), so will give it a go at higher height setting in the spring. Thanks Marked as spam  Answered on October 28, 2024 12:00 pm |
